How do I activate DTA HD on Comcast?

Go online to to be connected to the XFINITY Activation Web page. 3. Follow the instructions on the displayed screens. Or, if you would like to activate your new XFINITY TV service using your phone, please call 1-888-270-6445.

Can I get Ethernet from my cable box?

Besides in/out RF ports, the box sports an RJ-45 jack. You plug an Ethernet cable in here, which can link to your router or one of your networked devices. Up to 16 MoCA devices can be attached on your home network, so more Ethernet jacks can be added to your coaxial cable line later.

Can I plug Ethernet into Xfinity box?

Connect one end of the coaxial cable to the cable wall outlet and the other end to the Cable In/RF IN on the back of the modem. Connect one end of the Ethernet cable to your computer and the other end to the Ethernet outlet on the back of the modem.

Is the Pioneer Elite vsx-94txh a / V receiver good?

The VSX-94TXH had ample power to drive my quite high-end speaker suite to cinematic levels and well beyond in my studio of 2,500-plus cubic feet – and it sounded just fine in doing so. I wasn’t crazy about the effect of the MCACC equalizations, but these are defeatable and manually modifiable, so no worries.

What kind of HDMI does a pioneer TV use?

If your inner geek takes you there, have a ball. The Pioneer converts incoming analog video – composite, S-, or component – each up to the “higher” formats and to HDMI. The resultant digital output can be set to either “Auto” or “Pure,” as well as to various resolutions.

Is there a pure mode on the Pioneer Elite?

The Pure mode preserves incoming resolution and simply converts to digital for output via HDMI. Or the receiver can be set to scale everything to 480/576p, 720p, 1080i, or 1080p – though 1080p output works only on 480i/p or 576i/p signals.

Can a DVR 942 connect to a component TV?

Red/white from DVR 942 to component side of TV and you have audio. Same HDMI cable used from DVR to TV and got both video and sound. Digital audio from DVR 942 to Sony Dream System receiverc connected via opitcal fiber cuts in and out losing audio every 15 to 20 secs.

What kind of cable do I need to connect my Comcast box to my TV?

Confirm that you have the correct cables. If your TV is an HDTV, you can use an HDMI cable to connect your Comcast box to your TV; if not, you’ll need standard A/V cables (the red, yellow, and white cables) to connect the box to your TV.

The VSX-94TXH had ample power to drive my quite high-end speaker suite to cinematic levels and well beyond in my studio of 2,500-plus cubic feet – and it sounded just fine in doing so. I wasn’t crazy about the effect of the MCACC equalizations, but these are defeatable and manually modifiable, so no worries.

Where is the HDMI port on a Comcast box?

On most Comcast cable boxes, the HDMI port is either in the bottom-right corner of the box or at the bottom of the box’s back. X Research source If you’re using A/V cables instead, plug each cable into the same-colored port on the back of the box (e.g., plug the yellow cable into the yellow input).

If your inner geek takes you there, have a ball. The Pioneer converts incoming analog video – composite, S-, or component – each up to the “higher” formats and to HDMI. The resultant digital output can be set to either “Auto” or “Pure,” as well as to various resolutions.