How do I connect my rear speakers to my computer?

Connect the sound cable with black connectors into the Rear Speaker Out port on the back of the computer. Plug the other end of the cable into the black port on the subwoofer, next to the green port. Connect the sound cable with orange connectors into the orange Center or Digital Out port on the back of the computer.

How do I connect an old stereo to a smart TV?

Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system. Depending on your device, the audio input may be labeled TV INPUT or VIDEO INPUT.

What are the different colored jacks on the back of my computer?

Unless your computer is very old, the jacks are color-coded green for line-out — for speakers or headphones — blue for line-in and pink for a microphone. The microphone and speaker jacks may also have small images next to them. The line-in jack is intended for music players or other audio devices.

How do I connect my computer to surround sound?

How to Configure 5.1 Sound on Windows 10

1. Press Windows key + R to open a Run window and type “mmsys.
2. Go to the Playback and select your playback device that is capable of outputting 5.1 sound.
3. In the Speaker Setup window, select 5.1 Surround and hit Next.

How do you connect a stereo to a control amplifier?

Connect the KT-87 tuner to the KC-207 control amplifier. Use an analog stereo cable (the red and white type) from the tuner’s “Output” into the controller’s “Tuner” input. It should be labelled just like the inputs for “CD” or “Tape” would. Make sure you have the antenna hooked up to the tuner.

How to connect speakers to a stereo system?

1 To start, it helps a great deal to draw a picture of what you are connecting. 2 Set up your equipment where you want it to go. Figure out where you want to put your speakers. 3 Connect the audio output from your first source (a CD player, for instance) to an audio input on your receiver with your cables. …

What kind of cable do I need for my stereo?

Connect the KT-87 tuner to the KC-207 control amplifier. Use an analog stereo cable (the red and white type) from the tuner’s “Output” into the controller’s “Tuner” input.

What kind of stereo do I need for navigation?

Navigation stereos feature built-in GPS guidance, with large touchscreens that’ll display your route information. Most will play DVDs. These stereos are designed for people who no longer listen to CDs. They do all the stuff that other stereos do, but they don’t have a disc player built in.

1 To start, it helps a great deal to draw a picture of what you are connecting. 2 Set up your equipment where you want it to go. Figure out where you want to put your speakers. 3 Connect the audio output from your first source (a CD player, for instance) to an audio input on your receiver with your cables.

Connect the KT-87 tuner to the KC-207 control amplifier. Use an analog stereo cable (the red and white type) from the tuner’s “Output” into the controller’s “Tuner” input. It should be labelled just like the inputs for “CD” or “Tape” would. Make sure you have the antenna hooked up to the tuner.

Connect the KT-87 tuner to the KC-207 control amplifier. Use an analog stereo cable (the red and white type) from the tuner’s “Output” into the controller’s “Tuner” input.

Navigation stereos feature built-in GPS guidance, with large touchscreens that’ll display your route information. Most will play DVDs. These stereos are designed for people who no longer listen to CDs. They do all the stuff that other stereos do, but they don’t have a disc player built in.