How do I connect my subwoofer to my Yamaha sound bar?

Making the Connection

1. Locate the Subwoofer Out jack on your sound bar.
2. Locate the input on your subwoofer.
3. Plug one end of the cable into the sound bar’s Subwoofer Out jack and the other end into the subwoofer’s Input jack.

Why does my Yamaha receiver not have a subwoofer?

If the sub is connected to the eft and right outputs, it is NOT connected to the subwoofer output, so it is not receiving any sound routed to the subwoofer in the receiver. ANd of course, the sub level controls affect the sub channel, not the left and right, so no great surprise, really, that changing the sub level did nothing.

Where is the bar on a Yamaha subwoofer?

The Yamaha uses bars to indicate the levels, and it’s right in the middle for subwoofer level. I think that’s the default. I tried moving the bar all the way to the right but it didn’t help.

Why does my subwoofer not connect to the sound bar?

The Red STANDBY light on the Subwoofer came on for about 1 second. Then the Blue LINK light starts blinking rapidly. I held the ID SET button for about 1 minute. Nothing changed. I then held the MUTE button on the remote. The Soundbar powered off, IDSET came up on the display and then the soundbar powered up.

How to fix a Yamaha Yas 209 soundbar?

Its a finnicky annoying soundbar and the instructions that Yamaha provide are as good as useless. I had the same issue. I pulled the power out for 15 seconds, waited for it to boot up and then put fingers on volume increase and power buttons for 15 seconds – this cleared the buffer or whatever.

Why is my Yamaha sound bar not connecting?

For the subwoofer wireless pairing, it just won’t happen no matter what. I’ve tried the standard manual procedure and I’ve also tried resetting the soundbar to no avail. The subwoofer’s red standby light keeps blinking and no connection can be made. I’m thinking it might be a faulty unit at this point. What are the devices connected to it?

Its a finnicky annoying soundbar and the instructions that Yamaha provide are as good as useless. I had the same issue. I pulled the power out for 15 seconds, waited for it to boot up and then put fingers on volume increase and power buttons for 15 seconds – this cleared the buffer or whatever.

How do you connect a subwoofer to a sound bar?

You have to turn the sound bar OFF, then attempt to pair the subwoofer by pressing the “-” under “subwoofer” on the remote. Paired up right away. Really weird that it works that way, but glad I got the bass back.

What to do if your subwoofer is not pairing up?

If you run into a pairing issues it is important to unplug everything from the main unit (all HMDI and other connections except for power) and reset the bar by pressing and holding three buttons (volume up and down and source) until the device shows that is has reset. Unplug the power cable and unplug the subwoofer.