How do I pair my Aluratek Bluetooth headphones?

How to pair – AIS03F

1. Plug the unit into a dock.
2. Hold the button on the side of the unit until the LED light starts to blink rapidly.
3. Go to the bluetooth settings on your phone, tablet, or other bluetooth enabled media player and search for the device.
4. Select AIS03F from the list and make the connection.

How do I pair AIS01F?

Activate AIS01F pairing mode by press and hold the power button for 6-7 seconds. 3. Activate your device’s Bluetooth function and set your device to search for Bluetooth devices. Select AIS01F when it is found.

How do you put Aluratek into pairing mode?

With the transmitter off, press and hold the power button until you see the red and blue lights flash. Once the red and blue lights are flashing, put your receiver i.e. headset or speaker into pairing mode. They will then find each other and pair with each other.

How do you pair Aluratek ABT05F with headphones?

Make sure ABT05F is turned off 2. Activate your device’s Bluetooth function and set your device to search for Bluetooth device. 3. Slide power button to ON side,blue LED light flashes once (When ABT05F is powered on, it will enter pairing mode directly if there is no pairing record.)

How do I charge my Aluratek Bluetooth?

Charging the battery Connect the USB end of the cable provided to your PC or USB power adapter (not included) and the charger plug to the charging jack of ABT01F. Please charge the battery for a minimum of (3) hours. The Red LED will be on while charging. When charging is complete, the red LED will turn off.

Can I make my TV Bluetooth compatible?

Important first step: Make sure your TV can support Bluetooth. Otherwise, look for a 3.5mm AUX, RCA, or optical audio output. Get a Bluetooth transmitter, connect it to a power source, and then pair your Bluetooth headphones or speakers.

How do I Pair my aluratek Bluetooth receiver?

Follow the instructions below to pair our Bluetooth receiver to your device. With it off, press and hold the power button until you see the red and blue lights flash.

Where do I find the aluratek model number?

Once the red and blue lights are flashing, have your computer or mobile device search for available devices and you should see the model number appear on the list as an available device. Select the model number of the Aluratek device. Follow your device’s prompts to compete the pairing sequence.

How long does it take to charge an ais01f battery?

Connect the larger USB end of the cable provided to your PC or USB power adapter (not included). Plug the smaller Micro USB to the charging port of AIS01F. The red LED will be on while charging. Please charge the battery for a minimum of 3 hours. When charging is complete, the red LED will turn OFF. Operation Using AIS01F With Power Connected

Follow the instructions below to pair our Bluetooth receiver to your device. With it off, press and hold the power button until you see the red and blue lights flash.

Once the red and blue lights are flashing, have your computer or mobile device search for available devices and you should see the model number appear on the list as an available device. Select the model number of the Aluratek device. Follow your device’s prompts to compete the pairing sequence.

Can you use abc01f as a Bluetooth headphone?

Connect to ABC01F to turn them into Bluetooth headphones. Experience low latency Bluetooth 5 technology which eliminates audio delay so you can enjoy rich sound clarity in sync with any video, movie and gaming.