How do I reset my Onkyo sr803?

To reset the AV receiver to its factory defaults, turn it on and, while holding down the [VIDEO 1] button, press the [STANDBY/ON] button. Clear will appear on the display and the AV receiver will enter Standby mode.

How do I program my Onkyo universal remote?

Press and hold DISPLAY for 3 or more seconds while holding down the REMOTE MODE button to which you want to program the remote control code. The remote indicator lights in the input mode. 3. With the number buttons, enter the 5-digit remote control code within 30 seconds.

What is RVC mode?

RCV (Receiver) mode simply means that the receiver’s remote is set to control the receiver as opposed to being set to its CEC MODE which would mean it is set to control another device connected to the AV receiver via HDMI using HDMI Control (RIHD on Onkyo devices). Mine doesn’t control anything else in CEC mode.

What kind of circuitry does Onkyo tx-sr803 use?

The TX-SR803 incorporates Onkyo’s VLSC (Vector Linear Shaping Circuitry), which employs a unique D/A conversion circuit to mitigate the effect of signal noise. As noise is magnified during the conversion process, even minimal amounts of noise can adversely affect audio quality.

Why is my Onkyo ht-r391 receiver not power on?

I have an Onkyo HT-R391 receiver (part of a HT-S3500 HTIB system) which will not power on at all. I turned it off last night after using for several hours and it wouldn’t not turn back on this evening.

How to set up an Onkyo AV receiver?

AV Receiver TX-SR803/803E Connection 19 TX-SR703/703E TX-SR8370 Turning On & First Time Setup En AV Receiver TX-SR803/803E TX-SR703/703E TX-SR8370 Instruction Manual Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit.

Is there a warranty on an Onkyo receiver?

Unfortunately my unit doesn’t qualify for that warranty extension and Onkyo warranties are only for 2 years I believe. I checked the fuse on the power supply and it looks intact to me. There were also a couple of fuses on whatever board is next to the power supply and they looked identically intact: