How do you fix a plasma TV that has sound but no picture?

If Your Plasma TV Has No Picture and No Sound:

1. Turn off the TV and unplug it from the wall.
2. Wait 5 minutes so that the capacitors are discharged.
3. Unplug the connector going into the Z-sustain and then plug the TV back in.
4. Check for sound.
5. Unplug the TV and wait another 5 minutes.
6. Plug the TV back in and check for sound.

How do you fix a black screen on a plasma TV?

Tips You Can Try to Fix A Black or Blank TV Screen

1. Switch off your TV and then unplug it.
2. After 15-30 minutes, plug the TV back in then press and hold the power button for a few seconds.
3. Next, release the button and turn on the TV again.

Why does my plasma TV screen go black?

The most common reason for a cellphone’s screen to go black is a simple hardware failure. This can be caused by the actual LCD going bad, by the cable that runs between the LCD and control board going bad, or even just from the cable’s connectors coming loose.

How can I get a picture on my plasma TV?

To do that, follow these steps: Unplug the TV and wait 5 minutes. Remove the buffer and see if you get a picture with sound. If your TV has two buffers, disconnect the upper buffer and see if you get a picture on the lower screen. Then disconnect the lower buffer and see if you get a picture on the upper screen.

How big is the screen on a pioneer TV?

Ignoring technology-rabid 1080p-obliged consumers, Pioneer’s 2007 Kuro and Elite Kuro displays sport a 1,024 × 768 XGA resolution panel for 42-inch models, and the 50-inch flavors up the ante with a 1,365 × 768 WXGA resolution. With both being 16:9 dimensionally, only the 50-inch has square (1:1) pixels.

What should I do if my plasma TV is malfunctioning?

Here are the steps you need to take in order to troubleshoot your malfunctioning plasma TV. Turn off the TV and unplug it from the wall. Wait 5 minutes so that the capacitors are discharged. Unplug the connector going into the Z-sustain and then plug the TV back in. Check for sound.

What do I need to set my pioneer Kuro TV to?

As for the picture sizing, you will need to set your Pioneer Kuro TV input to “dot-for-dot” (no scaling), and maybe the overscan setting as well in order to exactly. On Samsung LCD HD TVs, the option makes more sense.

To do that, follow these steps: Unplug the TV and wait 5 minutes. Remove the buffer and see if you get a picture with sound. If your TV has two buffers, disconnect the upper buffer and see if you get a picture on the lower screen. Then disconnect the lower buffer and see if you get a picture on the upper screen.

Where is the model number on a pioneer plasma TV?

Your model number is located on the rear of the player under the bar code. Elite® Signature Series 50” Class (49.85” Diagonal) High-Definition Monitor Elite® Signature Series 60” Class (59.58” Diagonal) High-Definition Monitor My Pioneer Plasma will not turn on, what can I do? I have lost the TV Guide listings on my plasma TV.

Why does my plasma TV have a green spot in the middle?

My pioneer plasma tv has a green spot in the middle of the screen when watching some programs. Does anyone have an idea what i

Why is there no picture on my LG plasma TV?

No Picture on Your LG, Panasonic, or Samsung Plasma TV: Identifying the Problem Check to see if there’s sound when the TV is plugged in. If there’s no sound either, then it’s likely there’s a problem in the power supply.