Is the Yamaha htr-3064 still in production?

Yamaha HTR-3064 has been discontinued. See all Yamaha Music Set Top Boxes / PVRs / DVRs. See the Best Set Top Boxes / PVRs / DVRs in 2021 as rated by Australians on ProductReview.com.au.

How to connect an LG TV to a Yamaha receiver?

There should be an HDMI port on the back of the TV labeled ARC (usually it’s HDMI input 3), connect an HDMI Cable to that HDMI port and connect the other end to an HDMI in port on the receiver (any HDMI in port on the receiver should do, just remember the input name) On the TV, you may need to go into the settings and enable ARC

How to turn on arc on Yamaha TV?

Using the Yamaha remote, press ON SCREEN, go to Setup, and select HDMI. In the HDMI menu select ARC and turn it on. By default AV4 is setup as your ARC input on TV1 and AV1 on TV2. You can change this by adjusting the TV Audio Input in the HDMI menu of the receiver. Please see page 98 in the instruction manual for more information.

How to put a banana plug in a Yamaha speaker?

a Remove approximately 10 mm (3/8”) of insulation from the ends of the speaker cable and twist the bare wires of the cable firmly together. b Loosen the speaker terminal. c Insert the bare wires of the cable into the gap on the side (upper right or bottom left) of the terminal. d Tighten the terminal. Using a banana plug

There should be an HDMI port on the back of the TV labeled ARC (usually it’s HDMI input 3), connect an HDMI Cable to that HDMI port and connect the other end to an HDMI in port on the receiver (any HDMI in port on the receiver should do, just remember the input name) On the TV, you may need to go into the settings and enable ARC

Why is my Yamaha receiver not connecting to my TV?

Your HDMI output has got switched somehow. The audio can go to the TV or to your receiver, but not both. To get sound from your receiver and connected speakers, the HDMI audio output setting needs to be set to off on your receiver. Now you will get sound from your speakers, but not the TV.

Can you use HDMI arc on a Yamaha receiver?

HDMI-ARC can only pass two-channel PCM stereo, Dolby Digital 5.1, and maybe DTS 5.1 to your receiver – depending on the model number of the TV – Whereas your Yamaha Receiver can also decode Dolby Digital Plus, Dolby TrueHD, and DTS-HD Master Audio and also has 4K pass-through if needed. HDMI-ARC can’t pass 7.1 channel signals.

How can I get sound from my Yamaha receiver?

To get sound from your receiver and connected speakers, the HDMI audio output setting needs to be set to off on your receiver. Now you will get sound from your speakers, but not the TV. If you switch it to on, it will be the reverse.