Is there a firmware update for Onkyo txnr616?

– Benjamin Franklin The latest firmware update, which can only be done through USB, is available on the Onkyo website for the Onkyo TXNR616 and TXNR515. This WILL FIX the HDMI issue of picture loss. I have personally done this on various projects and have field tested it for weeks now.

How does an Onkyo txnr-616 work on a PS3?

I installed an Onkyo TXNR-616 into the system. He still wanted the TVs in the other rooms to work so I ran his PS3, Apple TV, and Cable box into the 4×4. From there I went out to the receiver, and the other TVs. The receiver’s monitor output went out of the receiver, back into the switch.

Are there any known problems with Onkyo receivers?

It goes back to Onkyo and they “test it” for a couple of hours and it checks out “OK” and send it back, only to have the problem re occur after a few weeks. Anyone have any input as to what the problem could be? My wife says I can’t do sarcasm. She says I just sound like an a$$hole. This is a very well known problem with Onkyo receivers.

Can a Yamaha Onkyo be used as a HDMI receiver?

Not sure if its possible now, but I’d suggest a Yamaha over the Onkyo. You can set it up for HDMI pass through so you can lower the receiver off, and video AND audio will pass to the tv. Turn the receiver on, and only video passes through. You could eliminate the need to go from the receiver through the matrix for that room.

– Benjamin Franklin The latest firmware update, which can only be done through USB, is available on the Onkyo website for the Onkyo TXNR616 and TXNR515. This WILL FIX the HDMI issue of picture loss. I have personally done this on various projects and have field tested it for weeks now.

I installed an Onkyo TXNR-616 into the system. He still wanted the TVs in the other rooms to work so I ran his PS3, Apple TV, and Cable box into the 4×4. From there I went out to the receiver, and the other TVs. The receiver’s monitor output went out of the receiver, back into the switch.

What to do if your Yamaha txnr616 loses HDMI?

Lesson learned, a deal is not always worth it. Not knowing your system, needs and budget go with an RX-A if you’re going back to Yamaha. The firmware update to fix the HDMI issue is for the TXNR515 and TXNR616 ONLY done through USB per their instructions.

How long does it take to update tx-nr616 firmware?

Precautions for TX-NR616 / TX-NR616AE Firmware Update 1 Please read the update instructions carefully before beginning. 2 The firmware update should take 30 to 40 minutes. 3 Depending on the conditions of the network, a firmware update via a network may take more than one hour or even fail to finish.