Is there any way to fix DVD player showing disc error?

Remove the disc from the DVD player. Use a lint-free cloth and some denatured alcohol or water to clean the disc and remove any dust or smudges that may prevent the player from reading it properly. Reinsert the disc into the player and press “Play” to see if cleaning the disc fixes the “NO DISC” error.

Why does my DVD player say error?

The message DISC ERR is usually displayed when the unit ca see the disc but not play the disc. This usually occurs when the disc is scratched or dirty. The message NO DiSC is displayed when the unit simply can not read or detect the disc at all. This can also occur if the disc is scratched or dirty.

How do you know if your DVD player is broken?

Listen to the machine when you insert the DVD. If you hear noises in the form of a series of clicks and creak-like sounds as the lens and laser both engages and attempt to read the disc, your lens is likely still good, only dirty or otherwise having difficulty reading the disc.

How do you unfreeze a DVD?

Turn the DVD player completely off and unplug it from the wall outlet. Leave unplugged for 30 seconds to 1 minute, then plug it back in and turn on the power. If the DVD player still freezes, turn it off again and look for the manual eject button on the device.

What to do if your DVD player says Please wait?

If the player still tries to start but doesn’t get past the ‘Please Wait’ message try the following and see if it ‘resets’ your player. 1. Turn off the player. 2. Switch off the power at the wall outlet and remove the power cable from the outlet. 3. Leave the player disconnected for about 1-2 minutes.

What causes my DVD player to stop playing?

Software problems – Software problems are much common with DVD drives or DVDROM drives. They are much easier to notice, especially if you realize that your DVD skips, continuous or repetitive audio noise, search or track seek problems, random behavior.

What can I do if my DVD drive is not working?

Installing updates can fix what’s wrong with your drive. If your DVD drive does not show up on the Device Manager, it’s possible that you have a loose cable. Cables are accidentally unplugged when a PC is moved from one location to another. Check your connections to see if all cables are connected.

How can I Fix my Sony DVD player?

Turn off the player. 2. Switch off the power at the wall outlet and remove the power cable from the outlet. 3. Leave the player disconnected for about 1-2 minutes. 4. Reconnect the power cable to the wall outlet and turn on the power at the wall outlet. 5. Turn on the player, Hopefully this procedure will reset the player. Was this answer helpful?