What HDMI input should I use for Apple TV?

Plug your Apple TV into power and connect it to your TV with an HDMI cable. To watch movies in 4K HDR on Apple TV 4K, make sure that you’re using an HDMI 2.0 or later cable, and have a TV that supports 4K, HDR, or both.

Which HDMI port is best for Apple TV 4K?

It’s important to point out, however, that the current Apple TV 4K doesn’t support 120Hz — even with a software update. That’s because the current-generation Apple TV is equipped with an HDMI 2.0 port, which is limited to 4K resolution at 60Hz. To enable 4K resolution at 120Hz, an HDMI 2.1 port is required.

What HDMI port is best for 4K?

HDMI 1.4 – If you want your HDMI cables to support 4K resolution, you need to make sure that they are High-Speed HDMI cables. They are tested to transmit video resolutions from 1080p to 4K with a richer color palette. With or without HDR, you need High-Speed HDMI cables.

How do I connect my Apple TV to my TV?

Plug your Apple TV into power and connect it to your TV with an HDMI cable. To watch movies in 4K HDR on Apple TV 4K, make sure that you’re using an HDMI 2.0 or later cable, and have a TV that supports 4K, HDR, or both . Then turn on your TV and select the HDMI input that your Apple TV is connected to.

Why does my Apple TV not work with my Denon?

If it’s set to anything else, the setup will not work. Now the Apple TV 4K and all other devices work seamlessly though the Denon receiver and the Apple TV is outputting 4k and HDR with no issues. What model is your Denon receiver. I can’t get my 1909 Denon to work with the Apple TV 4K because of the missing optic audio output.

Why is my Apple TV 4K not working?

I found the solution after digging deep into the Denon Setup menus and the LG OLED menus. First I enabled HDMI Ultra HD Deep Color on one of the LG HDMI inputs. That made the Apple TV 4k work through the Denon A/V receiver, but consequently caused all the other sources hooked up to the receiver not to work.

What kind of HDMI do I need for Apple TV?

HDR works fine when connecting directly to my TV (LG OLED65G6P) but will not work when passing through the A/V Receiver. All HDMI Inputs and Outputs are HDCP 2.2 compatible and I’ve upgraded the receiver to the latest firmware.