What to do if your Samsung TV wont play?

If you require help for the products purchased from US, Kindly visit Samsung US support section and for other countries, kindly contact your local Samsung Subsidiary. If playback doesn’t begin shortly, try restarting your device.

What to do if your home theater is out of sync?

Check your manual to see if A/V Sync or Audio Delay setting is available on your home theater system. For other manufacturers home theater systems, check the instruction manual or contact the manufacturer for information on how to adjust the A/V sync setting. Set Digital audio out to PCM. On the supplied remote control, press the HOME button.

Why does my home theater not work on my TV?

If a home theater system is connected to your TV with an optical cable, there may be an audio delay that requires a manual adjustment on the home theater system. There also may be a setting on your TV that’s causing the issue.

What should the audio delay be on my TV?

Audio delay adjustments usually range from 0 millisecond to approximately 250 milliseconds. Check your manual to see if A/V Sync or Audio Delay setting is available on your home theater system.

How to troubleshoot a Samsung home theater system?

[Solution] Troubleshoot Samsung Home Theater System 1 • Check if the power cord is plugged securely into the outlet. 2 • Turn off the power and turn it back on again. See More….

How to reset the Samsung home cinema system?

• While NO DISC message appears on the display of the main unit, hold the remote control’s STOP button for longer than 5 seconds. INITIAL appears on the display and all settings will return to the default values Please note: Using the RESET function will erase all stored settings.

What’s the problem with my Samsung Blu ray player?

Thousands of owners of Samsung Blu-ray players and home theater systems have gone online to complain about the sudden issues, which seemingly started on June 19, according to ZDNet. While the reports vary, the most common problem appears to be Samsung Blu-ray players that continuously power on and off.

What to do if your Samsung TV has no audio?

Perform a Sound Test. Navigate to Settings > Support > Self Diagnosis, and then select Start Sound Test. If the issue occurs during this sound test, visit our Support Center to request service. Checking for updates is typically only needed when the issue started with the previous software update.

If you require help for the products purchased from US, Kindly visit Samsung US support section and for other countries, kindly contact your local Samsung Subsidiary. If playback doesn’t begin shortly, try restarting your device.

Why does my Samsung TV say no signal?

The TV may display the following error messages, mode not supported, no signal or weak signal, check signal cable, no time information, locked, or the HDCP has been compromised. Instructions for correcting the conditions that cause the TV to display each of these error messages are available in this guide.

What to do if your TV antenna does not work?

If you get all of your channels, the problem lies with the cable. • Move or rotate the antenna to improve reception, and then run repeat the Auto Program procedure. If the solution above does not fix your problem, then the tuner in your TV has failed, and you need to get your TV serviced. Is this content helpful? Thank you for your feedback!