Why does my TV lose sound on certain channels?

If you have audio on most channels, but have silence on some or all of your local network channels, you may have the Secondary Audio Programming (SAP) turned ON. The SAP feature allows your TV, VCR or Digital Cable box to tune in a second “track” of audio programming. Not all channels broadcast SAP signals.

Why can’t I hear Audio on my TV?

For starters, turn up the volume of your TV. If you can’t hear anything at all, make sure the set isn’t set on Mute. If you still don’t have a solution, then click on the Menu on your TV’s remote control and go to the Audio or Sound setting. Then, make sure the Multichannel sound feature is set at Stereo.

What to do if you lose sound on your TV?

larry, first try to reset your TV. Disconnect it from AC power, then press and hold the power button on the TV, and not the remote, for 10 seconds. After another minute, plug the set back in and press power once. Then try the other sound out from your TV to a set of speakers etc.

Why does my audio turn off when switching between inputs?

Why does my audio turn off when switching between inputs? If you find the audio on your inputs keeps turning off when switching between inputs, this would be due to having the Automatically Mix Audio button (also known as follow) enabled on the input.

When do you change channels do you hear a popping sound?

How to fix missing or lost sound in Windows?

How to fix missing or lost sound in Windows Check software volume control settings. Many software programs and games have settings for controlling sound output, and… Check Windows volume control settings. Check for a small sound icon in the Windows notification area in the bottom right… Verify …

How to fix no audio on local channels?

No Audio on Local Channels – Cable TV Issues 1 Verify in the program listing guide that the program has those features. 2 Check to see if the “MTS”, “STEREO” or “SAP” light on the TV or VCR is on. 3 If not, push the “MTS”, “STEREO” or “SAP” button on the TV or VCR. 4 Adjust the fine tuning on the TV set to restore the stereo or SAP. More

Why do I have no audio on my cable TV?

Solution: If you have audio on most channels, but have silence on some or all of your local network channels, you may have the Secondary Audio Programming (SAP) turned ON. The SAP feature allows your TV, VCR or Digital Cable box to tune in a second “track” of audio programming. Not all channels broadcast SAP signals.

How can I change the audio output from my TV?

The steps on how to change the audio output setting vary depending on your source device. Check your device manual or contact the manufacturer for further assistance. Make sure the volume is turned up. You also may need to go into the set-top box menu and select HDMI in the Audio Settings or Audio Coding section to pass the audio to the TV.

Why do I have sound problems on my direct TV?

One channel is experiencing sound issues. If only one channel is missing sound or there is sound distortion, it may resolve on its own in a few minutes. Sometimes, Secondary Audio Programming (SAP) creates sound problems. If you’re listening to SAP Dolby Audio, try switching back to the primary language: Press INFO on your remote control.