Why does my TV turn on but there is no video?

If you power on your TV but you do not see the menu options, or any video display – just a black, blank screen, and possibly no audio as well; try the recommended steps below to resolve the issue. Check if the status LED, in front of your TV is ON. When the TV is off or in stand-by mode the LED at the base of your TV should be solid white.

Why does my TV say no HDMI signal?

It seems as if your TV is set to go to a certain HDMI input when your TV turns on. Try removing the HDMI cable on the TV from input 2 and plug it into the HDMI input 1 next to it. This should make it so when you turn the TV to ON, the image will appear instead of having to change the inputs with the remote control everytime.

What to do if your Samsung TV is not working?

Check the settings on the device that is connected to the TV. There may be a switch or button that turns its different outputs on and off. 4 Replace the connection cables between the TV and the connected device. 5 Connect another device to the same input.

What should I do if my video player is not working?

Try to switch on/off the sound transmission through Digital A/V output (player Setup menu, Sound setting section), sometimes it has a considerable effect on the situation. Try different settings of video output: 480i/720p/1080i/1080p, 23.976/24/ 30/50/59.94/60 Hz. Your TV set may not support some video modes, or does it improperly.

Why does my HD TV say no signal?

If your TV displays a “No Signal” message on the screen (HDTV or Standard TV) it could be one of the 4 issues we have listed below… 1 – Is the NO SIGNAL issue happening on just one TV? If it is just one TV that is showing the NO SIGNAL… -Be sure your TV is on the correct source or input as your CABLE or SAT BOX.

Why does my TV quit working when I plug it in?

Using the remote and without it achieved nothing. Unplugging it and holding the power for x amt of time did nothing. Plugging it back in and holding down the power for x amt of time did nothing. Holding both volume buttons did nothing. Answer? probably a faulty power plug and so I bought a new tv. Was this answer helpful?

Why is my HDMI input not showing on my TV?

Press the Input button repeatedly until the correct HDMI input is displayed on the TV. Make sure to check which input on the TV you are connecting to. The location of the Input button on your remote and the number and names of the inputs may be different on your TV. The image below shows an example of a TV’s input selection.

What should I do if my TV won’t start?

Pull the plug and with the power disconnected hold the power button on for 60 seconds. After at least the 60 seconds plug the tv in and try to start it. If it works great if not , hold the power button in the on position for a count of 20 with the tv plugged in .