Why is my HDMI not working on my new TV?

Keep hdmi leads away from the aerial cable… signals from hdmi kit can cross-couple into the aerial cable and interfere with some frequencies. (Disconnect hdmi leads at both ends if trying to eliminate interference sources).

What should I avoid when I change channels on my TV?

Avoid using Variable, Auto Select, 4:3 Override or Native modes on cable or satellite boxes because the output resolution format may change each time you change channels, resulting in excessive channel change time or momentary flashes or distortions.

Why do I need to change the resolution of my cable box?

It is recommended to fix the format to 1080i resolution on your cable or satellite box. This way the cable or satellite box does not need to switch formats between channels. Channel change time may be improved and you may eliminate the momentary flashes and distortions.

What should I do if my direct TV is not working?

Unplug the receiver then disconnect the external hard drive. Plug the receiver back in and try to use the internal hard drive for a day or so. You won’t have access to recordings stored on the external drive until you plug it back in and reboot it. This can be frustrating for anyone who’s excited about watching event programming.

What to do if your TV is not working with your remote control?

On your remote control, press TV INPUT to cycle through inputs, such as HDMI and HDMI3. If nothing happens, try programming your remote control . If the problem persists, try connecting the receiver to the TV. If the sound returns, the problem is with the device connected to the TV and receiver.

What happens when I change the channel on my TV?

This solution is designed to assist if it takes a long time for the picture to appear, the TV becomes locked up or unresponsive, the audio is intermittent or drops out, or the picture gets distorted momentarily when changing channels or inputs.

What to do if your TV wont connect to your WiFi?

Press Settings on your remote > all Settings > General > Quick Start > off Power cycle the TV and test to see if its able to connect properly. Press Settings on your remote > all Settings > General > Simplink (HDMI-CEC) > off Power cycle the TV and test to see if its able to connect properly.

What to do if some TV channels are missing?

If your are only getting channels 2 through 13 If you are getting only channels 2 through 13, most likely you have the RF cable attached to the wrong input on your TV. 1) Remove the RF cable from its current RF input and attach it to the other RF in on the TV. 2) Follow the steps for “If you are missing random channels” directly below.