Why is my portable DVD player screen black?

Usually when the LCD screen has gone black it means that the ribbon cable is loose or a capacitor/resister in the mainboard has gone bad. Try moving the screen around a little to see if the picture is going to come on. You can try returning the item or get it repaired by someone else.

Why is my car DVD player not working?

If the DVD player has a drop-down screen that doesn’t work, check to see if the fuse has blown. If it has, replace it with a similar model and then try turning on the DVD player again. You can also try turning off the car and then starting it again in case the battery wasn’t supplying enough power for the DVD player.

Can you replace the screen on a portable DVD player?

Your options are to live with them, purchase a new screen or purchase a completely new portable DVD player. White flickering spots or colored spots could be “stuck” pixels, which can sometimes be fixed.

What to do if your DVD player is not working?

I’d try a commercially available lens cleaner unit and run it a couple of times. IF that does not work you need to consider opening up your DVD player and either changing the lens assembly of even dig deeper after that.

What to do if your CD player is jammed?

Press the static-free rag on the back near the centre. Pull it away from the centre to the edge, and shake the rag to loosen any dirt and dust. Repeat until the entire disc is clean. Reinsert and see whether it works. Try another DVD. If another DVD works, then the original disc is faulty. Open your DVD’s tray.

Why does my DVD player keep skipping and freezing?

Dividing freezing and skipping is a common problem. Since DVD is coded in a spiral wave that initiates at the center of the disc and moves out to the outer edge, skipping and freezing is as a result of changes in the path of the DVD drive’s laser. Such changes are usually caused by: 1. Gently wipe the disc with a damp cloth.

Why is my dbpower portable DVD player not working?

If you see scratch on the screen, generally the scratch is just on the surface of the screen protector attached to the machine. I t will not affect the DVD player. You can take the screen protector off. 9. Power indicator light is not on. If the DVD is charged for six to eight hours and the player can work normally, then there is no problem. 10.

What should I do if my DVD player is not working?

Clean the lens while the DVD player is open. The lens should be cleaned with isopropyl alcohol and a cotton swab. If any of the solutions listed do not work, then the laser that scans the disk may be broken. If this is the case then the laser will need to be replaced.

What should I do if my Coby DVD player is not working?

The power cable should be plugged into the DVD player and also into a working power outlet. To make sure the outlet is working properly, plug in any other device to see if it powers on. Unplug the DVD and wait 30 seconds and then plug in the power cord again and try hitting the eject button immediately by holding it in for 5 seconds.

Dividing freezing and skipping is a common problem. Since DVD is coded in a spiral wave that initiates at the center of the disc and moves out to the outer edge, skipping and freezing is as a result of changes in the path of the DVD drive’s laser. Such changes are usually caused by: 1. Gently wipe the disc with a damp cloth.