Why is there no audio coming from my TV?

Temporarily unplug all the TV connection cables and reboot the TV set. Sometimes, temporarily unplugging the connected cables might help resolve your TV no sound issue. This temporary reset works to clear the short-term memory of the television, and also helps to resolve some other issues.

Why is there no sound when playing a DVD?

Follow this procedure to troubleshoot no sound when playing a DVD or audio CD. Ensure the disc is inserted into the DVD player correctly. Ensure the audio cables from the DVD player are connected properly to the television or stereo receiver. NOTE: Audio from a Super Audio CD will only be output from the analog outputs of the DVD player.

How can I fix no sound on my TV?

Television Has No Sound Answer 8: If using an “S” video cable into an input on the back of your TV, these cables carry no sound, just video, so make sure you connect an audio cable too. Television Has No Sound Answer 9: Hook up an external device to the “TV audio out” input.

How to troubleshoot no sound / audio with a digital box?

Remove the power cable from the back of the unit and unplug the power from the wall or power bar. Wait 30 seconds and then reconnect the black power cable. It will take between 30 seconds and 2 minutes for the cable box to reboot. Power on your cable box and test it again. If playback doesn’t begin shortly, try restarting your device.

Can a Bose DVD play sound but no picture?

The Bose 321 System is a series of DVD-based home media systems in the Bose 2.1 home theater line. The DVD plays sound but there is no picture. I replaced the HDMI cable and the problem remains. If I unhook the Bose system and install a different DVD player directly to my TV, I get both the sound and the picture Answered!

Why does my DVD player say no sound on TV?

A potential reason to DVD player no sound on TV trouble is related to the DVD player connection, whether the connection is proper and firm in a place or not. To solve this problem, just make sure your cables are in right spot on both. The DVD player, for composite cable should be in order with yellow white and red.

Television Has No Sound Answer 8: If using an “S” video cable into an input on the back of your TV, these cables carry no sound, just video, so make sure you connect an audio cable too. Television Has No Sound Answer 9: Hook up an external device to the “TV audio out” input.

How can I play a CD with no sound?

1. Double-click the speaker icon, select the Options menu, and choose Properties. 2. In the Show the following controls section, select Volume Control and Wave. 3. Click OK. Solution 2: Try playing a commercially-produced CD.

Can a Super Audio CD play on a DVD?

NOTE: Audio from a Super Audio CD will only be output from the analog outputs of the DVD player. Ensure the television or stereo receiver is set to the correct input for the DVD player.