How do I connect my Sony DVD player to my speakers?

How to Connect 5.1 Speakers to a DVD Player

1. Unplug the DVD player and subwoofer from the electrical outlet.
2. Connect the white and red plugs on each end of the audio cable from the left and right audio outputs on the DVD player to the matching inputs on the back of the sub.

How do I connect my RCA DVD player to my HDMI TV?

Connect the component or composite video cables and audio cables (white and red RCA) to the back of your DVD. Take the other side of the cables, a total of 5, and connect them in the corresponding place on the video converter. Use an HDMI cable to connect the converter box to the TV.

Can you plug speakers into a DVD player?

While home DVD players typically do not have a specific jack for connecting speakers, they will have outputs (both analog and digital) that allow the audio signal to be routed to a stereo/home theater system for simple stereo or multichannel surround sound through that system’s speakers.

What to do when there is no sound on a Blu ray player?

If the volume is very low, select the Audio DRC or BD Audio Mix on the Blu-ray Disc player to Off . Set the BD Audio Mix setting of the Blu-ray player to On if there’s no sound once the movie started. Audio settings you can select in the Blu-ray player menu. Digital Audio Output Auto: Normally select this.

What kind of cable do I need to connect a Blu ray player?

If you are using an HDMI-to-DVI adapter or cable, you will need to connect a digital (optical or coaxial), or red and white analog cable to your devices to receive an audio signal. DVI inputs only support video signals. The audio input available on the TV determines which cable you should use.

What do I need to connect arc to my TV?

If not, check your product manual or specifications to see if the ARC feature is supported. If you find that your TV, A/V receiver or home theater system does not support ARC, you will need to use Option 2: Coaxial Digital Cable, Optical Digital Cable, or Audio Cable to connect your devices. Make sure that both devices support ARC functionality.

What happens when you connect a Blu ray player to a TV?

There’s no sound or audio when you connect a Blu-ray Disc player to the TV with an HDMI cable. Downmix Surround: Outputs audio signals with surround effects. Select this when you connect an audio device that supports Dolby Surround (Pro Logic) or DTS Neo:6. Stereo: Outputs audio signals without surround effects.

What do I need to hook up surround sound on my TV?

Things like game consoles, DVD players, and cable boxes will use the TV’s HDMI input as their audio output, so plug these items into the receiver to route their audio through your surround sound. You’ll need to attach the receiver to the appropriate HDMI inputs with additional cables.

What to do when there is no sound on your TV?

IMPORTANT: Verify that the source you are playing is encoded with Surround Sound audio. If not, the audio will be very difficult to hear using a Surround Sound setting. Set Surround Sound to OFF when playing a source that is not encoded with a Surround Sound signal. Check each speaker to make sure they are properly connected to the A/V receiver.

How do you hook up a subwoofer to an AV receiver?

Subwoofers almost always plug directly into the audio receiver. Connect the subwoofer. Most subwoofers connect to the receiver via a standard set of AV cables. The subwoofer port on the receiver is typically labeled “sub out” or “sub pre-out”.

What kind of cable do I need to hook up my TV to my Receiver?

Connect the receiver to the TV. For best results, use an HDMI connection to connect the TV to the HDMI Out port on the receiver. You can use older connectors (e.g., AV cables), but they will result in much lower quality. Most modern TVs support HDMI.