What to do if cable box is not connected to AV receiver?

If the cable used to connected the TV and the cable box is not connected properly. Follow these steps to resolve the issue. Connect the HDMI cable from the HDMI OUT of the cable box to the HDMI SAT/CATV input of the AV receiver.

Why is there no sound coming from my AV receiver?

If still sound is not heard after adjusting all these settings, set the Input Mode of the AV receiver to Auto. There is no sound or audio through the speakers when watching television programming . No digital audio when connected with an optical or digital coax cable .

Why is there no sound on my HDMI TV?

Then exchanged the cable box, thinking it was bad, but still no sound, with only HDMI cable connected. Tried component with RCA audio, and that works. Have tried new HDMI cable, still no sound. Sound turned up on Cable box and TV, no mute. Have reset audio and TV to original factory settings.

How can I connect my HDMI cable to my AV receiver?

Connect the HDMI cable from the HDMI OUT of the cable box to the HDMI SAT/CATV input of the AV receiver. NOTE: In this case, the HDMI SAT/CATV input used is just an example of an input labeled on the AV receiver, but you can use any of the HDMI inputs on the AV receiver.

Can you connect a HDMI to a Denon TV?

I receive no picture on my TV, no indication on the receiver it sees an HDMI device, no sound. However, the PC sees and is outputting video and sound to the Denon receiver, it shows in the sound device that it is outputting to the Denon.

If the cable used to connected the TV and the cable box is not connected properly. Follow these steps to resolve the issue. Connect the HDMI cable from the HDMI OUT of the cable box to the HDMI SAT/CATV input of the AV receiver.

If still sound is not heard after adjusting all these settings, set the Input Mode of the AV receiver to Auto. There is no sound or audio through the speakers when watching television programming . No digital audio when connected with an optical or digital coax cable .

Connect the HDMI cable from the HDMI OUT of the cable box to the HDMI SAT/CATV input of the AV receiver. NOTE: In this case, the HDMI SAT/CATV input used is just an example of an input labeled on the AV receiver, but you can use any of the HDMI inputs on the AV receiver.

How many HDMI inputs does Denon AVR 3808ci have?

Most important are the four HDMI 1.3a inputs that are said to be compatible with both Deep Color and x.v.Color video content. (Note that there are currently no video sources encoded with such.) The HDMI inputs are switchable to one monitor output. Personally, I would have liked a second HDMI output.

How can I connect my cable box to my TV?

Just use the TV remote to select Source, and then select Connection Guide. It will show you how to connect various devices. Most cable and satellite boxes today can be connected with HDMI, and that’s a good thing, because HDMI offers the best picture and sound.

How can I connect my TV to my AV receiver?

NOTE: Set the corresponding input of the AV receiver being used. In this case, press the SAT/CATV button on the remote control of the AV receiver. Set the INPUT of your TV to the corresponding HDMI IN used. Set the HDMI audio output of the AV receiver.

How does a cable box connect to a receiver?

Audio output of either the TV or cable box goes to the receiver. simplest is via hdmi if available, otherwise there should be a red and a white connector for stereo output on the box wich goes into the stereo input on the receiver. receiver stereo out goes to tv stero in.

How do I hook up my cable box to my TV?

One way to do it is 1. Cable box HDMI goes to the TV HDMI input. 2. Audio output of either the TV or cable box goes to the receiver. simplest is via hdmi if available, otherwise there should be a red and a white connector for stereo output on the box wich goes into the stereo input on the receiver. receiver stereo out goes to tv stero in.

What kind of cable do you need for an AV receiver?

If you have an older TV or receiver that lacks ARC, connect an optical digital audio cable between your TV and receiver. Of course you’ll still need the HDMI connection for the video signal. Yamaha’s AV Setup Guide app helps you plan and complete your component connections.

Where are the red and white wires on a cable box?

The red and white wires are for audio purposes, that is, they bring the sound from the cable box to your TV. Without them, you will only see the videos on your TV but will not hear any sound. Behind your cable box, are ports where these wires are inserted. Mostly indicated with “video/Audio out.” There are three ports with a colour on each port.