What to do if your Onkyo receiver keeps switching on and off?

If you’re knowledgeable with electronics it would be really hit and miss to go poking around, plus you’re more likely to damage it or give yourself a good shock. My recommendation is to find a reliable and reasonable repair show but more so, ask your brother if he’s sick of his current receiver and get him to sell you that for a song.

Is it possible to blow a fuse on a receiver?

As long as nothing is shorted out, your receiver should go back to normal. If your receiver is still on the fritz, you may have blown a real fuse.

Where is the fuse on an AV receiver?

Some receivers have a screw-in fuse in the back of the unit that can be removed and inspected easily, while others may have one or more fuses inside the case–you may have to unplug the unit, remove the case and root around inside to see.

Why is my Onkyo ht-r391 receiver not power on?

I have an Onkyo HT-R391 receiver (part of a HT-S3500 HTIB system) which will not power on at all. I turned it off last night after using for several hours and it wouldn’t not turn back on this evening.

What causes the Onkyo protection circuit to be activated?

The Onkyo protection circuit is activated when the sensor in the receiver detects excessive heat or voltage irregularities. Using speakers with the incorrect impedance and running the receiver at excessive volumes for a prolonged period will trigger the protection circuit.

How do I Fuse my Onkyo tx-sr606?

1) Unplug the receiver’s power cord from the wall and leave unplugged for at least one hour. Remove all speaker and audio cables from the back of the receiver while waiting. 2) Reconnect the power cord after at least one hour has passed. Leave the speaker and audio cables disconnected.

Why does Onkyo randomly shut off while playing?

It randomly shuts off while playing or would immediately turn off as soon as i turn it on. I have tried everything available on the internet without any success. The behavior is totally random. sometimes it would play for hours without any problem and sometimes immediately turn off. The equipment connected is as below: 1.

How can you Hard Reset an Onkyo texas-nr708-hardware?

Reset the processor of the Onkyo by following the steps below: To reset the AV receiver to its factory defaults, turn it on and, while holding down VCR/ DVR, press ON/ STANDBY.