Why is my sound not working after I dropped my phone?

There are two possibilities: The speaker itself damaged; shock of drop could misplace the coil and break one of its connection wires that are very fragile. You cannot fix this and the speaker itself should be replaced. The wire connecting speaker module to the board may have broken or loose.

What to do if your phone gets wet and the sound doesn’t work?

Placing your phone in uncooked rice for a day or two can help by sucking the moisture out, but some delicate parts may be irrevocably damaged. It’s entirely possible for the internal speaker to be damaged but for the headphone jack, which is almost always a different hardware component, to remain perfectly intact.

What to do when your sound goes out on your TV?

The sound went out on my tv I did the following Disconnect it from AC power, then press and hold the power button on the TV, and not the remote, for 10 seconds. After another minute, plug the set back in and press power once. Then try the other sound out from your TV to a set of speakers etc. it did not help But!!!!!

What to do if your remote doesn’t work?

Check with your cellphone’s camera if your remote is sending the command to your receiver. (Focus the front led of your remote with your cell, it can see the infra red light) If not, (I’m pretty not,) you must open your remote and clean the circuit and silicone corresponding to not working buttons .

Why is the sound not working on my TV?

If none of the various input types have audio then the TV is definitely faulty. If the analogue inputs work (Component and Composite video) but not the digital inputs (HDMI, WiFi, Internet) the there is a problem with the audio digital processor section or perhaps the audio digital settings in the TV if it has any.

Why does my Denon remote not control volume?

The volume works but seems to be a weak connection. You must push the volume buttons several times and hold for a long time for it to work. Quite often it isn’t worth it and I just adjust on the unit. All other buttons function fine. Above answers were helpful in what isn’t the problem!

What to do if your TV is not working with your remote control?

On your remote control, press TV INPUT to cycle through inputs, such as HDMI and HDMI3. If nothing happens, try programming your remote control . If the problem persists, try connecting the receiver to the TV. If the sound returns, the problem is with the device connected to the TV and receiver.

The sound went out on my tv I did the following Disconnect it from AC power, then press and hold the power button on the TV, and not the remote, for 10 seconds. After another minute, plug the set back in and press power once. Then try the other sound out from your TV to a set of speakers etc. it did not help But!!!!!

What to do when there is no sound on your computer?

STEP 1 – Open Run box by pressing Windows and R keys together. Type control in the text box and hit Enter. STEP 2 – Click on Sound. A new window will pop-up and you can see audio playback devices list here. If you are not able to see anything right click and click on show disabled devices.

The volume works but seems to be a weak connection. You must push the volume buttons several times and hold for a long time for it to work. Quite often it isn’t worth it and I just adjust on the unit. All other buttons function fine. Above answers were helpful in what isn’t the problem!